basic types of wall gauges allow the user flexibility
in measurement techniques. The snap type gauges allow
for a quicker evaluation of the product dimensions by
adjustable contacts. The minimum/maximum settings are
adjusted by the user for a simple pass or fail check.
The indicator type gauges have a much longer reach, with
the actual dimensions determined by a dial indicator.
This heavy duty wall gauge has a go/no go range of adjustment
from 0-7/8". The carbide contacts can reach a length
of 1-5/8" from end of pipe.
A special design wall gauge with an extended reach of
up to 5-1/2" from end of pipe. The go/no go configuration
utilizes adjustable carbide contacts to handle a wall
thickness from 0 to 1".
The extra long reach arms allow wall thickness measurement
to be made up to 23" from end of pipe or coupling
connection. The unique hinged indicator gives a direct
measurement of wall thickness in 0.001" increments
from 0 to 1". In addition, the 2" wide throat
design allows readings to be taken behind an upset or
installed coupling. This is not intended for use with
pipes having an inside diameter of less than 3".
This heavy duty wall gauge gives a direct measurement
of thickness up to 7/8". With a 15" extended
reach throat and a spring loaded grip, wall measurements
of 0.001" accuracy can easily be obtained in several
locations. Intended for use on pipe 2-3/8" and larger
with a maximum of 7/8" wall.